Other hospital furniture

Other furniture

Medical Comfort Tools and furniture are designed to enhance patient care by providing support and comfort during recovery, treatment, or daily activities in healthcare settings 

.Size:800*400*780/1080mm
.Material:
.Table top is made of MDF
.Table frame is made of Powder Coated Steel
.Operated by gas spring
.Height Adjustable from 780 to 1080mm

.Material: Stainless steel
.Unfold size: 2000*1800*500mm
.Five castors, two supporting bars

.Material: 304 Stainless steel
.Unfold size: L1500*W1800mm
.Each panel width is 500mm
.Four castors, two supporting bar

.Size:800*320*780/1080mm
.Material:
.Table top is made of ABS Plastic
.Table frame is made of Powder Coated Steel
.Operated by gas spring
.Height Adjustable from 780 to 1080mm

.Size;900*450*900-1250mm
.Material:
.Table top is made of ABS Plastic
.Table frame is made of Aluminum Operated
.By gas spring.
.Height Adjustable from 900 to 1250mm

.Size;890*450*900-1200mm
.Material:
.Table top is made of ABS Plastic Tablethe
.The frame is made of Aluminum
.Operated by gas spring.
.Height Adjustable from 900 to 1200mm

.Material: stainless steel tube, cast iron base, ABS round handle
.Base: cast iron, ABS plastic cover
.Lower tube: 25mm Upper tube: 19mm
.Adjustment method: knob
.Height: 110-200cm
.Castors: 2 inches without brakes

.Material: stainless steel, ABS, steel plate
.Base: ABS plastic inner cast iron plate
.Adjustment method: top screw

.Material: stainless steel, ABS, steel plate
.Base: ABS plastic inner cast iron plate
.Adjustment method: top screw

.Material: stainless steel, ABS, steel plate
.Base: ABS plastic inner cast iron plate
.Adjustment method: knob

.Material:stainless steel pole, Plastic bottom base
.Height of IV.pole:1.2-2.1m
.Five swivel castor

.Material: stainless steel, ABS
.Base: ABS plastic connector, stainless steel round tube
.Lower tube: 25mm Upper tube: 19mm
.Adjustment method: top screw
.Height: 110-200cm
.Castor: 2-inch brake wheel

.Material: stainless steel, ABS, steel plate
.Base: ABS plastic inner cast iron plate
.Lower rod: 32mm Upper rod: 25-19mm
.Tray: steel plate spray-coated
.Adjustment method: knob
.Height: 150-210cm
.Castor: 2.5-inch brake wheel

.Material: stainless steel, nylon, aluminum alloy
.Base: nylon
.Lower rod: 60*32mm oval aluminum alloy column
.Upper rod: 25-19mm
.Tray: aluminum alloy
.Adjustment method: top screw
.Height: 150-210cm
.Castor: 3-inch brake wheel

.Material:stainless steel pole and bottom base
.Height of IV.pole:1.2-2.1m
.Five swivel castor

.Material:stainless steel pole, epoxy painted steel bottom base
.Height of IV.pole:1.2-2.1m
.Four swivel castor

.Material:stainless steel pole and bottom base With a plsatic tray
.Height of IV.pole:1.2-2.1m
.Five swivel castor

.Material: stainless steel pole and bottom base with a plastic tray
.Height of IV pole: 1.2- 2.1 m
.Five swivel castors

.Size:800*410*730/1130mm
.Material:
.Table top is made of MDF
.Table frame is made of Powder Coated Steel
.Operated by gas spring.
.Height Adjustable from 730 to 1130mm

.Material: Aluminum alloy
.Base: Die-cast aluminum
.Column: 60*32mm oval aluminum alloy column
.Panel: cold-rolled steel plate, spray-coated
.Panel height: 90cm
.Basket: 28*16*11cm
.Castor: 2.5-inch brake wheel

.Material: aluminum alloy
.Base: die-cast aluminum
.Column: 60*32mm oval aluminum alloy column
.Suitable for 12-14 inch flatbeds
.Height: 90cm Basket: 28*16*11cm
.Castor: 2.5-inch brake wheel

.Material: Aluminum alloy
.Base: Die-cast aluminum
.Column: 83*50mm oval aluminum alloy column
.Tray: Aluminum alloy
.Infusion pole: 25-19mm stainless steel
.Tray height: 80cm Basket: 28*16*11cm
.Castor: 2.5-inch brake wheel

.Material: stainless steel, aluminum alloy, ABS
.Base: ABS inner cast iron plate
.Column: 32mm stainless steel
.Panel: aluminum alloy, quick-detachable
.Panel height: 90cm Basket: 28*16*11cm
.Castor: 2.5-inch brake wheel

.Material: stainless steel, steel pipe
.Base: six-legged steel plate
.Lower rod: 42mm steel pipe column
.Upper rod: 25-19mm stainless steel
.Adjustment method: top screw
.Height: 110-260cm
.Castor: 2.5-inch brake wheel

.Skid-resistant rubber surface
.Legs protected by rubber feet
.anti-rust and nice appearance
.One step stool: Size:L43*W34*H23cm
.Load bearing:159kg

.Skid resistant rubber surface Legs protected
.by rubber feet wooden stool surface covered
.by anti-skid PU.
.Two step stool: .Size:L60*W40*H23/43cm
.Load bearing:159kg

.Material:stainless steel material
.Stool surface is covered with foam :Diameter40cm
.Height is adjustable: 500-660mm

.Stool surface: Diameter 360 mm
.Height is adjustable: 460-660mm

.Material:stainless steel material
.Stool surface: Diameter 300 mm
.Height is adjustable: 500-700mm

.Size: 1500*600*1100mm
.Technical Parameters:
.Size (LxWxH): 1800x600x1100mm
.Faucet: 3pc
.Electric input: AC220V, 50Hz.
.Technical Configuration:
.Material: 304 stainless steel
.Electric water heater: 1pc
.Senor tap control on/off water
.Soap dispenser: 1pc

.Foamed cushion surface makes the wounded feel comfortable.
.room, medical ward and ICU room for patient transportation.
.With one bag
.Size: L1800*H500*H10mm
.Size: L900*H500*H20mm

.Thickness: 8cm
.Material: high density foam with Canvas(or artificial leather.PU)
.Characteristics: air through, water proof, easy to clean PU cover and removable. Sectional design works to make the mattress and bed surface fit well in diferent positions such as back-rest and knee-rest adjustment.

back-rest and knee-rest adjustment.
Mattress size without flaps: 200*90*7cm
Extension flaps length: 50cm+50cm( head and foot
side) Material: PVC, 0.32 thickness number of cells: 130
Weight support: 135KGS
Pump pressure range: 40-100mmHg, air output: 6-7L/Min
Alternating: 1-in-2

Mattress size without flaps: 200*86*9.5cm
Material: PVC+ Nylon, 0.34 thickness
number of cells: 20+1 free spare cell
Weight support: 140KGS
Pump pressure range: 40-100mmHg, air output: 7-8L/Min
Alternating: 1-in-2

Thickness: 8cm
.Material: high density foam with Canvas(or artificial
leather.PU)
.Characteristics: air through, water proof, easy to clean PU cover and removable. Sectional design works to make the mattress and bed surface fit well in diferent positions such as back-rest and knee-rest adjustment.

Thickness: 8cm
.Material: high density foam with Canvas(or artificial
leather.PU)
.Characteristics: air through, water proof, easy to clean PU cover
and removable. Sectional design works to make the mattress and
bed surface fit well in diferent positions such as back-rest and
knee-rest adjustment.

Thickness: 8cm
.Material: high density foam with Canvas(or artificial
leather.PU)
.proof, easy to clean PU cover and removable. Sectional design works to make the mattress and bed surface fit well in different positions such as

Mattress size without flaps: 200*90*22cm
Cover Material: Nylon PU with cotton Lining
Cell Material: 0.4mm Nylon PVC
Weight support: 160KGS
Pump pressure range: 50-120mmHg, air output: 8L/Min
Alternating: 1-in-2
With CPR, Power failure alarm, Tech support alarm, Alarm mute